Vintage Integrated Amplifier w/ Wood Case - Very nice condition!
All pre-owned product is tested in our service department and have been passed for sale... and comes with a 90 day warranty!
Our techs have gone thru this unit with care - All electrolytic capacitors have been replaced. Phono board transistors have all been replaced with low noise replacements. Preamp board transistors have all been replaced with low noise replacements. Voltages regulation circuit have new zener diodes. Amplifier has been adjusted according to service manual specifications. All controls and potentiometers have been cleaned.
In very nice condition! Original box and packing are NOT uncluded. Due to the age, this is LOCAL SALE ONLY! See last image for specs.
Made in the USA (not Japan) Circa 1971 -1976
Some details from Marantz: This is a 60 W per channel direct coupling amplifier. It has a 4 line inputs and one phono input, separable preamplifier and power amplifier sections, posts for 2 pairs of speakers and a headphone socket tapping into speaker outputs. It lacks additional midrange potentiometer (present in many Marantz amplifiers from that period), but bass and treble controls are separate for each channel. The amp also has high, low and loudness filters, as well as the MUTING switch (-20 dB) and a complex mono switch that allows to listen to left channel only, right channel only, or both channels converted to mono. There are microphone inputs and special DUBBING input/output on the front panel (6.3 mm jacks), which doubles for the TAPE 2 IN/ OUT input/output on the rear panel. TAPE 1 and TAPE 2 loop sockets on the rear panel are additionally doubled – we have a choice of standard RCA jacks and DIN sockets. Interesting feature are the SCOPE sockets for connecting an oscilloscope, which could be found in top models of Marantz tuners and some receivers.
Original units had issues w/ background noise but we replaced the transisters w/low noise repplacements - so it sounds great!
