Stereo Tube Integrated Amplifier - ALL NEW TUBES!
All pre-owned product is tested in our service department and have been passed for sale... and comes with a 90 day warranty!
All tubes 4 x EL84, 2 x 12AX7A, and (1) 12AT7 are NEW JJ's!!
In very nice condition! Original box and packing are NOT included, but we will pack carefully!
Very cool tube amp! This modern classic packs quite a bit of power in a small package. It uses 4 EL84 tubes to achieve a very impressive 25 watts per channel. Don't be scared off by the small power rating, this amplifier will smoke many cheaply built amps rated at much higher power:)
Circa 2002-06 Specs Info from USA Tube Audio:
Maximum Power Output: 25 W per channel at 8 ohms, 1KHz
Rated Output Power: 20 W per channel at 8 ohms, 26Hz to 50KHz
Frequency Response: (at 1 watt into 8 ohms) 7Hz to 95KHz + 1dB; 0dB at 1KHz
Bandwidth: 14Hz to 80KHz + 3dB; 0dB = 20 W 1KHz, 8 ohms
Distortion THD + N: Less than 1.5% at 15W output, 39Hz to 10KHz, 8 ohms
Circuit Type: Ultra Linear, Class AB1
Input Impedance: = or < 250Kohms
Input Sensitivity: Max. 900mV for 20 watt output at 1KHz
Output Impedance: 4 ohms and 8 ohms
Negative Feedback: Less than 7 dB
Signal & Noise Ratio S/N: 70dB below rated output from 10Hz to 200Khz.
Tube Complement: 2 matched pairs (4) of EL84 power output; 2 pcs. 12AX7A pre-amplifier.
Power Requirements: 110V-120 VAC 60Hz 90 watts-standby, 200 watts maximum (220 VAC 50Hz option).
Dimensions: 12 inches wide by 8 inches deep by 5 inches high.
Weight: 18 pounds net, approximately 22 pounds packaged
