Carver AL-III

Early 1990's Dipolar Loudspeaker System

$1,199
/pair

All pre-owned product is tested in our service department and have been passed for sale... and comes with a 90 day warranty!

The cabinets have seen some wear, but if you have the room, these are petty cool vintage dipolar speakers!

NO grilles included. Original box and packing are NOT included, so these are LOCAL PICKUP ONLY!

Note: These are 72.5" High, so bring the correct size vehicle when you come!

Two-way dipole loudspeaker system

Because the AL-III is a dipolar transducer, with sound radiating to front and rear, the overall sonic effect is astonishingly realistic.

All frequencies above 150Hz handled by line-source 48-inch dipole ribbon, which provides precise imaging not possible with speakers using multiple drivers.

All frequencies below 150Hz are handled by a 10-inch Quasi-butterworth 3rd order long throw tuned to 24Hz woofer

Specs

Provides three level controls to precisely tailor the loudspeakersto your listening environment

Anechoic Frequency Response: 34 Hz to 20 kHz +- 3dB

Impedance: Nominal 4 ohms

Sensitivity: 86 dB ref. to 1 watt at 1 meter

Woofer box is vented

Recommended Power: Up to 575 watts per channel; 65 watts minimum, 8 ohms rated.

Includes separate binding posts for woofer and ribbon driver, to allow for bi-wiring and bi amplification.

Weight 80 lbs. each

Dimensions: 14.5 W x 16.5 D x 72.5 H

 

Our Return Policy