Sunfire Theater Grand Processor III

Audio/Video Preamp Processor

$399

In nice condition. Original box, packing, manual, and Remote are included.

Full featured!

Specifications

Line Level Inputs
Sensitivity (for 0.5 V output): 125 mV
Sensitivity Phono: 1.6 mV
Frequency response: 20 Hz 20 kHz +/ 0.5dB
Signal to Noise (relative to 2V out):
Analog 97dB
Digital 105 dB
Distortion (THD): < 0.03%
Separation (at 1 kHz): 70 dB
Tone Control: Bass: +/ 10 dB Treble: +/ 10 dB

Audio Outputs - Balanced Audio / RCA
Frequency Response: Left and Right (Large): 20 Hz 20 kHz
Center and Surrounds (Large): 20 Hz 20 kHz
Subwoofer: 20 160 Hz (crossover set to 160Hz)
(The Sub plays the bass from the other channels using Bass Management)
Delay adjustment: Center: 0 25 mS Surrounds: 0 15 mS
(delay adjustment is automatic when speaker distance is entered)

Video Section
Video inputs/outputs: 1 Vp p /75 ohms
Component Bandwidth: 100 MHz, 1.5 dB
Composite Bandwidth: 6 MHz, 2 dB
S video Bandwidth: 18 MHz, 1.5 dB

FM Tuner Section
FM range: 87.5 108 MHz, 0.2 MHz steps (0.05 MHz for some export models)
Usable sensitivity (Mono): 1.6uV (75 ohms) 15.2 dBf (75kHz DEV,30dB)
50dB Quieting sensitivity (Stereo) 31.6uV (75 ohms) 41.2 dBf
Audio output frequency range: 30 Hz to 15 kHz, +.5dB, 3dB

AM Tuner Section
AM frequency range: 530 1710 kHz in 10 kHz steps (9 kHz steps for some export models)
Usable sensitivity (30% mod.,S/N 20 dB):16uV / (600 uV/m)
S/N (30% mod., 1 mV input): 48 dB

Trigger Outputs
12V Main and Zone2 Trigger current less than 500mA total
Main zone trigger relay contact rating: 24 VDC 2A maximum

Power Requirements

120 VAC 50 60 Hz: 40 W

Our Return Policy