Panamax M5300-EX

11 Outlet HT Power Conditioner

$149

In really nice condition! Original box and packing is not included. Manual is available on line. Great deal on this!

The M5300-EX is designed to provide noise isolation between 3 isolated outlet banks including 2 high current outlets so that any noise created by an A/V component cannot contaminate the power going to equipment plugged into the other outlet banks. Panamax's patent pending AVM circuitry continuously monitors the incoming power displayed on the digital meter. A red lightning bolt below the voltmeter will flash to indicate an under or over voltage condition. Power to the connected equipment is automatically turned off if either of these conditions is detected. Monitor your power flow with the digital meter display: When voltage returns to a safe level, power to the equipment is automatically reconnected. Level 4 Power Cleaning and Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability. Improves Picture and Sound Quality: Your audio/video components are constantly being bombarded by electromagnetic interference (EMI) and radio frequency interference (RFI) through their power cords. This contaminated power can affect audio/video equipment and will degrade the overall performance of your entire system. Common symptoms of contaminated power include pops, hisses, hums and visual artifacts. The MAX 5300-EX is designed to filter this noise, supply clean power to your system and provide noise isolation between the outlet so that any noise created by an A/V component cannot contaminate the power going to equipment plugged into the other outlet banks. Level 4 Power Cleaning and Filtration eliminates common symptoms of contaminated power (including loss of detail, pops, hisses, hums and visual artifacts) and allows your A/V equipment to perform up to its full capability.

Monitors Incoming Line Voltage and Provides a Visual Indication of Power Level: Panamax's patent pending AVM™ circuitry continuously monitors the incoming power as displayed on the digital voltmeter. In case of an undervoltage or an overvoltage, a flashing red lightning bolt will be displayed in the voltmeter, and power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected. The M5300-EX is also designed to provide noise isolation between 5 isolated outlet banks (including 1 bank with 2 high current outlets) so that any noise created by an A/V component cannot contaminate the power going to equipment plugged into another outlet bank.

Key Features Not to be Missed: Sequential Startup/Shutdown: Complex audio/video systems may be susceptible to voltage transients generated internally at start-up/shutdown if all of the equipment is powered on or off at the same time. This can cause speaker "thumps" which are not only annoying but can also damage the speakers. The MAX® 5300-EX is designed to eliminate these transients by providing a "start-up" delay for the High-Current outlets and a "shutdown" delay for the Switched Outlet Bank. This allows the components plugged into the Switched Outlet Bank to power-up and stabilize before any amplifiers and powered sub-woofers are turned on. This sequence is reversed during shutdown. The amplifiers and powered subwoofers turn off, their power supplies drain, and then the equipment plugged into the Switched Outlet Bank is turned off. Voltage Sense Trigger: This feature provides an ON/OFF trigger for the MAX® 5300-EX using a Direct Current voltage signal. Many components such as pre-amplifiers and receivers have a DC trigger built in, and will transmit a constant power signal when turned on and in use. The presence of this power signal will turn on the MAX® 5300-EX's switched outlets. When the source component is turned off, the voltage trigger signal is also turned off and the MAX ® 5300-EX's shutdown sequence is initiated. An AC Adapter of the appropriate voltage, plugged into a switched outlet, may also be used if a DC trigger is not built in.

The MAX® 5300-EX voltage sense trigger input uses a standard 3.5mm (1/8") mini-plug jack. This jack has an electrically isolated switch built in. If nothing is inserted into the input jack, the voltage sense is bypassed and the Power Button on the front panel has sole control of the startup/shutdown sequence. If a plug is inserted into the input jack, the front panel switch is bypassed and the voltage sense becomes the startup/shutdown trigger. Automatic Over & Under Voltage Protection: Panamax's patent pending power monitoring circuitry constantly monitors the AC line voltage for unsafe voltage conditions such as prolonged over-voltages and under-voltages (brownouts). These unsafe conditions pose a very dangerous threat to all electronic equipment within the home. If the MAX® 5300-EX senses an unsafe power condition, it will automatically disconnect your equipment from the power to protect equipment from damage. Once the voltage returns to a safe level, the MAX® 5300-EX will automatically reconnect the power.

Technical Specifications:

Weight: 17 lbs

Dimensions: 17 x 12.75 x 3.5 (4.1 with feet) inches

Under-voltage shutoff: 90 VAC ±2 VAC

UL1449 Suppression Rating: 330V

Total Current Capacity: 15 A

Thermal Fusing: Yes

Protection Modes: L-N, L-G, N-G

Peak Impulse Current: 73,000 Amps

Over-voltage shutoff: 142 VAC ±5 VAC

Line Voltage: 120V, 60Hz

Initial Clamping Level: 200V

Energy Dissipation: 1815 Joules

Catastrophic Surge Circuit: Yes

Voltage and Polarity: 3 - 24V DC, bidirectional

Jacks: 3.5mm (1/8 inch) mono mini-plug

Current Requirement: 4.6 mA @3V, 58 mA @24V

Our Return Policy